What Is Trail Braking & How To Trail Brake

What Is Trail Braking & How To Trail Brake

The number one skill that our race car coaches see across all levels of racing that separates the great drivers from the good drivers, and then the good drivers from the bad is the ability to trail brake.  Before we get into how to trail brake let’s first discuss what is actually is and why it is so important.

 

What Is Trail Braking

 

Trail braking means having a small amount of brake pressure still being applied as the driver carves the car all the way down to the apex.  It is important to understand that during the trail brake zone (after initial turn in all the way down to the apex) we are not applying a lot of pressure.  Instead, it should feel like you are simply resting your big toe on the brake pedal.

 

The goal here isn't really to be slowing the car down.  Yes we are doing that, but in my mind I'm conciously doing this simply to try and keep weight on the front nose as I turn.  That is the big reason why I am doing it.

 

Do We Ever Not Trail Brake?

 

Yes, there are a few exceptions.  But these are exceptions to the rule.  Example corners of where we don’t trail brake are almost all limited to high-speed corners where there we do not need to brake on corner entry.  Some examples of corners on different race tracks would be:


The Kink at Road America

Turn 8 at Thunderhill

Turn 12 at Road Atlanta

 

You will notice there is a constant theme in these corners.  All high-speed corners where we don’t brake at all. So, for nearly every other type of corner where we will be braking, we will have some form on trail brake.  

This may mean we will see less initial brake pressure to be able to extend our brake zone to be longer but with lighter pressure for corners with typically short brake zones.  This is a great technique for the higher speed corners where we still need a little bit of braking to be done. The lighter pressure allows less weight to be transferred to the front end, which will keep the rear more settled.  This will allow us to still have the front grip we want without getting that over ration after turn in.

 

How To Trail Brake

 

The way I like to trach trail braking is as a 3 step process.  The first step of this process is identifying where our initial throttle application spot comes in.  

 

Initial Throttle Application - This is a golden rule that our race car coaches focus on.  We tell our drivers the following, “You are not allowed to get to throttle until the apex.  Until the point, you can start to unwind the steering wheel.”  

 

We really want to develop this discipline.  To understand why let’s talk about the two reasons why we see drivers apply the throttle before the apex:

 

  1. They feel the car has too much oversteer and the throttle settles the rear.
  2. The driver has over slowed, and when we overslow the only thing we can do is get to throttle.

 

So, let’s talk about point 1 first.  It is totally true that a little bit of maintenance throttle will settle the rear and create understeer.  There are some cases we want to do this, but in almost every scenario this will hurt us more than it will ever help. For most drivers the oversteer they are trying to fix is actually a good oversteer, we want that oversteer to rotate the car so we have the car pointed in the right direction mid-corner.  

We have a great article on oversteer and how to control it here:

How To Control Oversteer

 

I like the drivers I work with at Racers360 to think about maintenance throttle in the following way: Sure, it may make the car feel better.  But, you are essentially taking the ceiling of the ultimate amount of grip your car has, or the ultimate amount of entry speed you can bring in while still getting the perfect exit, and significantly lowering it.  

 

We need that weight on the front nose and that rotation to drive at a high level.  So, I would rather them focus on learning car control and experiment with the line for where a good level of rotation turns into too much rotation, rather than preventing any rotation from happening at all.

 

Now for point 2.  I want to break the bond between over slowing and getting to throttle.  The two should NOT be related in our minds.  

 

If we can be completely disciplined on not allowing throttle before the apex we may feel too slow on entry but we don’t turn one negative into two negatives and create a bad habit along the way.  Instead, once we feel like we are over slowing while turning into the corner and we take away the option of going to throttle to fix this issue our brain will naturally look for another solution to its problem.  

 

There are only two ways to fix over slowing. Those options are:

 

  1. Picking Up Throttle Too Early - Bad Solution
  2. Rolling More Entry Speed Next Lap - Good Solution!

 

Rolling More Entry Speed

 

So, now that we have built our discipline of not picking up initial throttle before the apex, we can focus on rolling more entry speed.  The first step of this next process is NOT braking deeper.  

 

We first focus on the back end of our brake zone.  Initially, I want the drivers I work with to do everything in the brake zone the same.  

 

Once they have mastered the discipline of the throttle application they will want to naturally start to roll in more entry speed.  Once they get to this stage I want them to focus on braking at the exact same initial spot, with the nice threshold pressure early in the brake zone.  But, here is the key thing that we tell them.

 

Focus on getting off of threshold brake pressure earlier and extending our brake zone to be longer but with much less time spent at heavy pressure and much more time spent on very light brake pressure.  Releasing the brakes should be a very slow process as we enter the corner.

 

The following graphic explains what we want to see using a data graph example.  The red line would be how their brake zone initially looks and the green line looks like what we see our drivers doing after a session with a Racers360 coach.

how does trail braking work

The Final Part

 

The very last thing that we want to see our drivers start to work on is braking later.  Only once they have mastered step one and two. Once they have mastered step 2 and still feel like they are over slowing, that is when we can focus on braking deeper.

 

It is so important to do this last not only because it is the highest risk part, but also because for lap time braking deep does nothing for us if we can’t combine it with good entry speed, a good turn in, a good apex, and a great exit.  Figuring all the rest out first lets us know what it all is supposed to feel like and we will know if we brake too deep because we won't execute the rest of the corner how we want to.

 

So, when race car drivers get to this stage we teach our drivers to slowly bring their brake zones later and later lap by lap. Our objective here is to get it to the point that we start to make small mistakes such as:

 

  • Missing our turn in point
  • Too much brake pressure still on after turn in
  • Locking up the tires during straight line braking
  • Too much entry speed so we miss the apex or can’t get to throttle where we want to

 

Once we start making these mistakes we back up that brake zone slightly and then we know we are right at the limit!

 

Looking for more help with trail braking or any other race car driving technique?

 I really hope you will consider getting personalized coaching from us at Racers360.  Using our one lap analysis we will use YOUR video that you send us (from any camera system, in any car, at any track) and we will break down your driving while filming over it using a webcam, annotation tools, and slow-motion abilities with our software.  

Racers360 race car coaching review

Your one lap video will be turned into a 15 - 20-minute in-depth break down from the very best coaches in the industry today. Thanks to this you no longer have to spend thousands of dollars on personal coaching, this whole service only costs $99 and there are no hidden fees.  

You get all of this personal coaching in every video. Our average customer has shaved 2 seconds of lap time after just one video… Show us any other $99 part that can save you 2 seconds!

Learn more here

 

Another great article and video we have on trail braking can be found here: What is trail braking & why is it fast.

 

If You Like This Post Please Give It A Share

2 Comments

  1. Martin Schacht on December 26, 2018 at 10:28 am

    I am getting excited going through this site…now, all I need is a camera, a good one.

    • Dion von Moltke on December 26, 2018 at 3:49 pm

      Great to hear Martin!!! Any simple camera will work, even from a go-pro or iPhone. (we work with plenty of drivers that send in videos from different iphone apps) If we can help you in any way get setup please let us know.

Leave a Comment